游戏邦在:
杂志专栏:
gamerboom.com订阅到鲜果订阅到抓虾google reader订阅到有道订阅到QQ邮箱订阅到帮看

分享设计FPS多人模式地图的方法(下)

发布时间:2014-08-11 16:27:01 Tags:,,,,

作者:Dodger

极长的视距

我们在上篇的“掩体”部份涉及到了一点,但重要的是用掩体打破长视距。如果做不到这一点就会降低技能型近战的重要性,并增加“只管开火”的花哨武器和远距狙击武器的重要性。它还会让那开阔区域的用处不及“风险/奖励”区域。

线性

玩家选择自己路径、线路和流程的能力对于优秀的多人模式玩法来说极为关键。极端的性线会对此构成障碍,我们应该避免这种情况,只有在你想呈现“风险/奖励”区域时例外。

无法攻破的埋伏地/狙击位置

狙击和埋伏是一件很有趣的事情,但遭遇这两者的威胁却一点也不好玩——尤其是在你无法避免其发生的情况下。为此,你应该仔细设置狙击和埋伏位置并进行平衡。在优秀的多人模式地图上,任何坚不可摧的位置都必须具有开放性否则就只能将其移除。

秘密区域

虽然在单人模式中寻找秘密区域是件趣事,但在多人模式游戏中却必须避开将亲近地图知识作为主要获胜因素的做法。秘密区域,尤其是那些拥有强大升级道具或武器的地方,会鼓励玩家掌握私密地图知识或避开技术型战斗的损害。

决定条件

它是否必须是对称的?

基于目标的模式(例如夺旗),通常采用对称性地图。我们很难平衡非对称性目标型地图,但它还是可行的。

它采用哪类关卡?自然的,海外的,还是人造的?它是一座城市吗?你制作地图时要用到哪类资产?

要在你制作首个地图或草图之前,尽早确定这些内容,这样你会更明确自己将使用哪些基本形状来构造地图。虽然大家都很容易迫不及待地直接进入构造地图环节,但我发现有许多地图之所以被搞砸就是因为在这个过程中缺乏足够的思考。

是否有必要支持多种模式或游戏大小?

在《Resistance:Fall of Man》中,我们的多数地图利用了不同玩家点数和游戏模式来构造。因为我们必须考虑如此多不同的参数来平衡地图,我们制作了大量选择来缓和平衡过程。这正是多数可调整大小的地图是对称性的原因。

选择你的区域

我将FPS多人模式关卡定义为一系列相连的“区域”。一个良好的区域包含以下特点:

1)拥有一个焦点

2)适合4-8名玩家进行战斗

3)包含相当数量的地形选择(例如垂直性)

4)拥有至少2个出口/入口。

选择焦点

提到焦点,你必须从两个范围来考虑:区域焦点和地图焦点。这两者都服务于两个目的:

1)作为导航辅导和区域/地区的地标

2)为区域/地图提供一个玩法和美学关注点

焦点还可以告诉玩家该区域是什么情况,如“灯塔”、“基地”、“洞穴”或者“船湾”。这些都可以让你了解所在区域的基本情况,以及其中可能存在什么焦点。例如,船湾可能就有一艘你将在其上战斗的太空飞船,至于灯塔,其作用就不言自明了。

以下是我发现有助于构造《Resistance》地图的一些原则:

*每个地图都要有一个基于整个地图的主要焦点

*焦点必须有助于增加视觉兴趣和推动玩家走向目标

*焦点可以是玩法对象,建筑、升级道具等

*最棒的多人模式“空间”是围绕兼具视觉和玩法兴趣的焦点而构造

focal(from ongamedesign)

focal(from ongamedesign)

决定流程/连接性

开始多人模式设计的重要一步就是创造一个简单的流程图表。流程图就是用一系列简单形状来代表区域(如方形、圆形、三角形等),而将其彼此相连的箭头则代表连接性。我在上篇文章中将此称为“泡泡图表”。

bubble(from ongamedesign)

bubble(from ongamedesign)

上图是三个简单的流程图范例。每个简单的形状均代表一个不同类型的区域,而箭头则显示了它们之间的流程。要记住这些箭头仅指示程程,它们并不一定传达关于入口、出口或其他内容的任何信息。

在设计流程时要考虑以下情况:

*全局流程(拾取道具的布置)

*局部流程(焦点、地形优势)

*考虑如何以最好的方法鼓励玩家制定好决策

*入口/出口(每个区域至少都要有2个,理想情况应该是3个)

*优秀的死亡竞技地图会连通到其他任何地方

*优秀的节点/CTF地图会战略性地封锁一些连接性(以便你追击竞争对手或者守护目标)

草拟出区域

现在你已经画下了流程图,是时候拟定区域了。你可以在纸上或者用3D工具完成,这取决于各个设计师的习惯。为这些区域想出玩法时,最好是先考虑形成一个区域的其他要素。最重要的是添加垂直性。

*垂直性很重要!

*增加视觉兴趣

*很好地重用空间

*将更多玩法引进更小的空间

*给予玩家有趣的选择

rustatorium(from ongamedesign)

rustatorium(from ongamedesign)

你还要开始考虑一些其他因素,如视距,空间是否适合安营扎寨,或者你想在这些区域设置什么玩法。

开放空间vs封闭空间

一般来说,我们应该避免使用大型开放空间,而要选择拥有大量掩体和垂直性的空间。但也有例外的时候,如你想让玩家易受攻击,如创造风险/奖励区域的时候。

风险/奖励场景

鼓励玩家做出选择的一个好方法就是在你的区域中布置一些“风险/奖励”设置。如果你想让玩家冒险赢得大奖励,就可以这么做。这方面的例子就是,将一件强大的武器放在一个易受攻击的地点(如一个大型开放区域,或者靠近墙体的地方)。

其他时候你可以诱使玩家作出战略性的选择。例如,你可以设置两条引向一个基地的路径,其一拥有良好的掩体和攻击守护者的极佳地点。另一者则拥有开放而易于防御的捷径,但会将玩家引向一个高地,以便其进一步摧毁敌人。

其他备忘录

CTF支持(对称性)

*CTF和节点模式几乎都有对称性要求以便取得平衡。

*CTF要求旗帜携带者有逃跑而非藏身的好地方。

无用的空间

*有时候你的地图中会含有优秀玩法永远都不会去的地方,因为它只会对他们不利。要避免这种情况发生。

*如果你通过测试发现了这些空间,要尽量在其中创造一个风险/奖励场景。在那里放置一个拾取道具或创造它是一个好去处的其他理由。如果做不到,就要封闭该空间以够新手在该空间受阻。

专用于FPS的贴士:

*要避免地形坡度的极端变化。这样不但会令行走时看起来太陡峭,也会阻挡玩家行走过程时的视线。

*在设计走廊式的空间(如小路、山谷、街道)时,要事先确定你打算引入玩法所需要的最小空间量。

*如果可以的话,在草拟3D空间时尽量使用已经创造的资产。这可以让你更好地了解自己所设计的空间在引进大量美术资产时是否仍然够大。

玩家的地图知识

虽然了解地图是获得胜利的关键,但它不应该成为输赢的决定性因素,对核心机制所掌握的技能才是。

如果你有以下情况,那么将对地图的了解作为胜败的决定因素就是一件坏事:

*秘密区域——秘密区域允许旗帜携带者藏身于CTF,并且会对了解地图的玩家而非技能型玩家有利。

*强大的隐藏拾取道具——只有已经玩过该地图的人才会知道要到哪里获得这些道具。一般来说,要将你最强大的武器设置于最容易进入的地方并用它们作为焦点。

*难以找到的创意——例如隐藏在关卡中会让其他所有人爆炸的一个按钮。如果将其设置易于进入的区域并激发一个你的对策这可能很棒,但不可将其用于隐匿之处。

*传送器——传送器通常不利于公平战斗,因为只有那些了解自己可去之处的人才能以此作出好决策。传送器在一些情况下是个好主意,但除非你真的有一些很棒的玩法,最好还是不要使用这种解决方案。(本文为游戏邦/gamerboom.com编译,拒绝任何不保留版权的转载,如需转载请联系:游戏邦

Designing FPS Multiplayer Maps – Part 2

By Dodger

Wow, it’s been a month. Things have been crazy at work lately, but they’re settling down a little now. As a result, I can finally put up the rest of the update I started more than 60 days ago (wow).

What is not Fun in Multiplayer

Incredibly long view distances

This was covered a bit in the “cover” section, but it is important to break up long views with cover. Failing to do so reduces the importance of skillful close combat and increases the importance of “fire and forget” splash weapons and long distance sniper weapons. It also makes large open areas less useful as good “risk/reward” areas.

A large open space

Linearity

The ability for players to choose their own routes, lines, and flows is essential to good multiplayer gameplay. Extreme linearity is a barrier to this and should be avoided except in the case that you want to present a “risk/reward” scenario.

Unassailable ambush spots / sniping positions

Sniping and ambushing people is a lot of fun. However, being on the receiving end of either of these things is not fun at all – especially if you can’t stop it from happening. To that end, sniper and ambush positions should be carefully placed and balanced. Any unassailable position should either be opened up or removed from a good multiplayer map.

Secret areas

While secret areas are fun to find in single player, every attempt should be made in a multiplayer game to remove intimate map knowledge as a major determining factor for victory. Secret areas, especially those with very potent powerups or weapons, encourage intimate map knowledge or hiding to the detriment of skillful combat.

Creating a Multiplayer Level

Determine Requirements

Does it need to be symmetrical?

Objective-based modes, such as Capture the Flag, are usually well-served by symmetrical maps. It’s very difficult to balance non-symmetrical objective-based maps, but it’s definitely possible.

What kind of level is it? Natural, alien, man-made? Is it a city? What kind of assets will you be using to make it?

By establishing this early on, before you do your first maps or blockouts, you can get a head start on what basic shapes you’ll want to use to construct your map. While it’s tempting to jump right into construction or mapping, I’ve seen plenty of maps get ruined because not enough thought went into this part of the process.

Does it need to support multiple modes or game sizes?

In Resistance: Fall of Man, most of our maps were constructed to take advantage of different player counts and game modes. Because we had to balance these maps for so many different variables, we made a lot of choices to ease in the balance process. That’s why most of the resizable maps were symmetrical, for example.

Choose your Areas

I define an FPS multiplayer level as a connected series of “areas”. A good area area is any space which:

a) Has a focal point,

b) Is a good space for 4-8 players to fight,

c) Contains a good amount of terrain choices (like verticality), and

d) has at least 2 (preferably 3) entrances / exits.

Choose Focal Points

When thinking of focal points, you need to think of them in two scopes: Area focal points and Map focal points. Both serve the same twin purposes:

1) To serve as navigational aids and landmarks for the area / map.

2) To provide a gameplay and artistic focus for the area / map.

Focal points also tell the players what an area is. “The Lighthouse”, “the base”, “the cave”, or “the docking bay.” Each of these gives you an idea of what it basically is, and what a focal point might be. For example, the docking bay may have a space ship in it that you fight on or around, while the lighthouse is pretty self explanatory.

Here’s a number of guidelines that I found useful in constructing maps for Resistance:

Every map should strive to have one major focal point that the whole map is based around.

The focal points must serve to add visual interest and to drive players towards a goal.

Focal points can be gameplay objectives, structures, powerups, etc…

The best multiplayer “spaces” are built around a focal point that attracts both visual AND gameplay interest

Determine Flow / Connectivity

A good first step when starting a Multiplayer design is to create a simple flow diagram. A flow diagram is simply a series of simple shapes representing areas (squares, circles, triangles, etc) with arrows between them which represent connectivity. You may remember me talking about these in a previous article. I called them “Bubble Diagrams.”

Pictured above are three examples of simple flow diagrams. Every simple shape represents a different type of area, while the arrows show the flows between them. Keep in mind that these arrows only indicate flow. They don’t necessarily convey any information about number of entrances, exits, or anything else.

When thinking about flow, it’s good to consider the following:

Global flow (pickup placement)

Local flow (focal points, terrain advantages)

Think about how to best encourage the player to make good decisions

Entrances / exits (every area should have at 2, but preferably 3)

Good deathmatch maps connect everywhere to everywhere else

Good node / CTF maps strategically block off some connectivity (to make chasing your opponents or defending objectives more possible)

Begin Roughing out the Areas

Now that you’ve got your flow down, it’s time to start roughing out your areas. This can be done on paper or in 3d, as suits the individual designer. When coming up with gameplay for these areas, it’s good to begin considering the other aspects that make up an area. Most important of all, however, is to add verticality.

Verticality is important!

Adds visual interest

Good re-use of space

Fit more gameplay into smaller footprint

Gives players interesting choices

You’ll also want to start thinking about things like view distances, how good you want your various spaces to be for camping, or what (generally) you want the gameplay to be in those areas.

Open Space Vs. Covered Spaces

In general large open spaces should be avoided in favor of spaces with lots of cover and/or verticality. The exception is when you want the player to be vulnerable, such as when creating a risk-reward scenario

Risk / Reward Scenarios

A good way to encourage players to make choices is to place a few “Risk / Reward” setups into your areas. These are any time you want to tempt the player into taking a big risk to obtain some big reward. An example would be a powerful weapon in a vulnerable spot (such as on a small beam, or in a large open area, or near a wall).

Other times you can tempt a player with an eventual strategic advantage. For example, you could place two paths leading into a base – one has good cover and excellent spots to attack the defenders. The other has a short patch that is open and easily defended, but leads to some good high ground you can use to further demolish your opponents.

A Few Extra Notes

CTF Support (Symmetry)

CTF and Node modes almost require symmetry to achieve balance.

CTF requires that the flag carrier have good places to run, but not to hide

Useless Spaces

Sometimes you will have places in your map that a good player will never go, since it only gives them a disadvantage. Try to avoid this, whenever possible.

If you find, through testing the space, that a part of the map is useless space, try creating a risk/reward scenario there. Put a pickup there or create some other reason why it’s a good place to have. Failing that, block the area off to keep newbies from having enough rope to hang themselves.

FPS-Specific Tidbits

Avoid extreme changes in terrain grade. Not only do they look too steep to walk up, but they are also pretty hard to see when walking towards them. More gentle grades will often be more obvious.

When designing corridor style spaces (Pathways, valleys, streets), determine the minimum amount of space needed for the game play you are intending on before designing these area.

If possible, strive to use to already built (to-scale) assets when roughing out a 3D space. This can give you a good idea of whether or not a space you designed is going to be big enough once it has been populated with art assets.

Player Map-Knowledge

While knowing a map well is a key to attaining vicory, in general it should not be an incredibly important arbiter of who wins or loses. Skill with the core mechanic fills that role.

Knowledge of the map as a determining factor of who wins the map is a bad thing when you have:

Secret areas – Secret areas allow flag holders to hide in CTF, and reward map knowledge over skill contests.

Powerful hidden pickups – Only people who have played the map will know where to get these. In general, place your most powerful weapons in easily accessible places and use them as focal points.

Hard-to-find gimmicks – Things like buttons hidden in the level that call in airstrikes make everyone else explode. These can be cool when they’re in an easily accessible area and provoke a gimmick that you have some countermeasure against, but not when hidden or secret.

Teleporters (sometimes) – Teleporters in general discourage fair fights, since only those with knowledge of where they go can make good decisions on coming out the other side. Teleporters can be good in some instances, but unless you really have some really good gameplay in mind, there’s usually a better solution.(source:ongamedesign


上一篇:

下一篇: